Marathon, TX Hail Storm – June 2025

Marathon, TX saw a concluded hail storm on 2025-06-04 with a peak confirmed hail size of 2 inches. The event produced three alert areas across the evening.

What Happened

The storm began affecting the Marathon area by late afternoon. The first alert came at 5:26 PM CDT with 1.25-inch hail and warning-level confidence. A stronger round followed at 7:29 PM CDT, when dual-polarization radar detected 2-inch hail. A third alert at 8:13 PM CDT showed 1.5-inch hail with the same radar-derived confidence.

The sequence shows a multistage hail event rather than a single short-lived core. The largest hail came in the middle of the storm cycle, then weaker hail remained in the system into early evening.

Damage Assessment

Hail in the 1.25-inch to 2-inch range is large enough to leave visible roof and exterior impacts across a mixed property base. In Marathon, that can include bruised shingles, dented metal roofing, broken window screens, damaged gutters, and strikes to siding, trim, vents, and exterior units.

Properties with older composition roofs will often show more consistent shingle wear than newer installations, but larger hail still reaches vents, flashing, skylights, and soft metal surfaces. Vehicles parked outside can carry the clearest signs of the event, especially on hoods, roofs, mirrors, and light housings.

The spread from 1.25 inches to 2 inches matters in the field. Smaller hail can produce scattered cosmetic loss. The 2-inch core raises the chance of more concentrated roof and vehicle impact along the stronger path through town.

For contractors, the alert sequence points to a window with repeated hail risk, not a one-time pass. Inspections should cover the entire property, including slope-by-slope roof checks, perimeter metal, fence caps, condensers, and window assemblies. Document any matching dent patterns on multiple elevations and look for impact marks that align with the time of the later radar-detected hail.

On homes and light commercial buildings, focus first on roof planes facing the storm approach, then work outward to gutters, downspouts, flashing, and accessories. Small punctures and soft-metal dents can sit alongside more obvious shingle bruising. Interior leak checks matter when hail reaches the 2-inch range, especially around penetrations and transition points.

What Contractors Should Know

This event supports a multi-call canvass in Marathon rather than a narrow spot check. The storm produced three separate hail alerts across about three hours, with the highest verified size at 2 inches. Field teams should treat late-afternoon and early-evening properties as the highest-priority inspection area.

Use a roof-first survey on addresses inside the warning area, then expand to vehicles, outbuildings, and attached metal components. Prioritize properties with aging shingles, exposed HVAC units, and broad metal surfaces. Where crews find one-sided impact or mixed dent patterns, compare the findings against the evening timing of the 7:29 PM CDT hail core.