Salt Flat, TX Hail Storm – July 2025

Salt Flat, TX saw a concluded hail storm on 2025-07-17 with a maximum confirmed hail size of 1 inch. The event produced four hail alerts from mid-afternoon into early evening.

What Happened

The first alert came at 3:25 PM CDT. Additional alerts followed at 3:42 PM CDT and 4:06 PM CDT, then a final alert at 5:52 PM CDT. Each alert carried 1-inch hail confidence from dual-polarization radar.

The sequence points to repeated hail detection across the same broader storm path through the afternoon. The warning area covered the Salt Flat, TX metro region during the event window. The storm has since concluded.

Damage Assessment

One-inch hail often produces visible impact on vehicles, roof coverings, and softer exterior finishes. Field checks should focus on roof slope transitions, vents, skylights, gutters, downspouts, and north- and west-facing exposures where stone or metal impact marks can be easier to document.

For contractors, the most useful initial split is between cosmetic impact and functional loss. Shingle bruising, cracked soft metals, broken tile edges, and dents to HVAC fins or window trim can appear in isolated pockets rather than across every address in the warning area. Roofs with older shingles, lightweight metal panels, or exposed roof accessories deserve priority on canvass routes.

What Contractors Should Know

Start with a tight exterior review of the property envelope. Look for fresh hail hits on ridge caps, flashing, gutters, chimney covers, fence tops, garage doors, and window wraps. On steep or complex roofs, a few isolated slopes can carry the clearest evidence while adjacent areas remain clean. Document with date-stamped photos before any temporary protection or cleanup begins.

Use the alert timing to organize field work. The storm produced verified hail alerts at 3:25 PM CDT, 3:42 PM CDT, 4:06 PM CDT, and 5:52 PM CDT. That pattern supports a late-afternoon canvass window for damage checks, customer outreach, and inspection scheduling across the Salt Flat area. Prioritize roofs with recent claims history, visible soft-metal impact, and properties with vehicles or exterior fixtures parked in open exposure.

For estimating, separate hail-related replacement questions from repair-only conditions. Check whether impact is limited to a single plane or spread across multiple sides of the structure. On commercial sites, note rooftop mechanical units, membrane punctures, metal flashing dents, and penetrations around vents and pipe boots. Ground-level evidence can be useful, but roof and accessory findings should control the scope.

The Strike Map provides precise hail track data for this Salt Flat event.