Hawk Springs, WY Hail Storm – August 2025

Hawk Springs, WY saw a concluded hail event on 2025-08-04 with a peak confirmed hail size of 1.75 inches. The storm produced five separate severe alerts through late afternoon and early evening.

What Happened

The first alert came at 4:37 PM MDT with 1.25-inch hail and radar plus spotter verification. A second alert followed at 5:15 PM MDT with 1.5-inch hail from dual-polarization radar. Another 1.25-inch hail alert was issued at 5:25 PM MDT.

The storm remained organized into the evening. A fourth alert came at 6:11 PM MDT with 1.5-inch hail from dual-polarization radar. The final alert came at 7:13 PM MDT with 1.75-inch hail, also from dual-polarization radar. That ended as the largest confirmed hail size in the event.

The alert sequence shows repeated hail production over a span of nearly three hours. The reports alternated between spotter-verified and radar-derived confidence, with the later alerts carrying the larger hail estimates.

Damage Assessment

Hail in the 1.25-inch to 1.75-inch range can affect roofs, vents, gutters, skylights, siding, and exterior trim. In a town like Hawk Springs, the most common field checks after an event like this are roof slopes, soft metal, window screens, and south- and west-facing elevations.

The 1.25-inch reports point to enough impact for visible bruising on asphalt shingles and dents on exposed metal. The 1.5-inch alerts raise the risk of broken seals, cracked plastics, and damage to rooftop accessories. The 1.75-inch peak adds a higher chance of widespread surface marks on vehicles, metal roofs, and lightweight cladding.

This event had multiple hail pulses. That pattern can leave uneven damage from one block to the next and from one roof plane to another. Contractors should expect mixed conditions across the same property, especially where tree cover, roof pitch, and building orientation changed exposure.

What Contractors Should Know

Start with a fast exterior survey. Note roof type, slope, age, and visible impact points before any teardown. On asphalt roofs, check for bruising, granule displacement, soft metal hits, lifted tabs, and damage around penetrations. On metal roofs, look for impact dimpling on seams, ridge caps, flashing, gutters, and downspouts. On siding and window packages, inspect for punctures, corner damage, cracked screens, and frame distortion.

Use the alert timeline to sort properties by likely exposure window. The earliest hail reports began at 4:37 PM MDT and the largest confirmed hail came at 7:13 PM MDT. Properties in the warning area during that span may show different damage levels depending on when the heaviest cells passed. Keep notes on impact direction, roofing material, and the presence of collateral damage to vents, HVAC fins, and exterior trim.

For assignment planning, this storm supports a phased canvass. Prioritize metal roofs, older asphalt systems, and any address with visible vehicle or soft-metal impacts. Then move to homes with no obvious exterior damage but a history of direct hail exposure during the late-day storms.