Levelland, TX Hail Storm – June 2026

Levelland, TX experienced a severe hail event in the late afternoon and early evening of June 8, 2026, producing radar-detected hail up to 2.41 inches. The event produced three successive NWS alerts and has concluded.

What Happened

A multi-alert storm moved across the Levelland warning area on June 8, 2026. The NWS issued three alerts tied to this event:

• June 8 · 4:17 PM CDT (21:17 UTC) – 1.25-inch hail – NWS warning only.
• June 8 · 5:31 PM CDT (22:31 UTC) – 1.25-inch hail – dual-polarization radar detection.
• June 8 · 7:52 PM CDT (00:52 UTC) – 2.41-inch hail – dual-polarization radar detection.

The first alert in the late afternoon was a warning-area advisory without a radar hail signature. A later late-afternoon update included a radar hail signature consistent with 1.25-inch stones. Early evening radar returns produced the strongest hail signature, with the largest radar-derived hail estimate at 7:52 PM CDT. The storm is no longer active.

Damage Assessment

Hail sizes detected across the Levelland warning area ranged from 1.25 inches up to the 2.41-inch radar-derived peak. Stones at the lower end of this range can dent vehicle body panels and damage soft metal fixtures. Stones approaching and exceeding 2 inches can fracture asphalt and architectural shingles, crack skylights, and cause significant windshield and glass damage.

Homes, parked vehicles, and exposed agricultural equipment within the NWS warning area are the most likely to show impact. Roofing systems with existing wear or older composite shingles are at particular risk. Property owners in neighborhoods north and west of central Levelland should prioritize visual inspections for broken glass, dented panels, and missing or split shingles in the immediate days after the event.

What Contractors Should Know

Document conditions on arrival. Photograph hail sizes next to a rule or coin, and capture oblique and elevation views of roofs and vehicles. Note exact addresses within the NWS warning area and record the time of inspection. Temporary tarps should be installed only after documenting and securing proper permit or homeowner consent. For roofing work, check for layered damage to underlayment and flashing around penetrations before removing existing shingles.

Prioritize safety and water mitigation. Address open penetrations and compromised skylights to prevent secondary water intrusion. Use trained roof-access protocols for wind and residual wet surfaces. Coordinate with property owners on insurance claim documentation. Keep repair scopes focused and measurable: list material types, approximate hail diameters observed, and the exact NWS warning area reference for each property inspected.

Paid subscribers can access the Strike Map for the precise hail track and damage zone mapping.