Amarillo, TX Hail Storm – July 2026

Amarillo, TX experienced a multi-zone hail-producing storm on July 24, 2026 during the late afternoon and early evening. The event produced up to 1.25 in hail and concluded by early evening after a sequence of NWS warnings.

What Happened

Severe convection moved across the Amarillo metro beginning in the late afternoon and ending in the early evening. The National Weather Service issued four separate warning-area alerts tied to this storm: 5:36 PM CDT (0.75 in hail), 6:08 PM CDT (0.75 in hail), 6:47 PM CDT (0.75 in hail), and 7:21 PM CDT (0.75 in hail). Each alert was issued as NWS warning only, with the warnings aligned to the storm’s progression through multiple notification zones in the metro.

Local radar and post-event reporting indicate a concentrated hail path through the central and western portions of the Amarillo metro. The sequence of warning polygons tracked a southwest-to-northeast progression across the city between late afternoon and early evening. The storm is concluded and no additional warnings remain active for the July 24 event.

Damage Assessment

Hail of this size can produce visible damage to exposed building materials and unprotected vehicles. Inspectors should expect denting on metal vehicle panels, chipped paint on untreated surfaces, and bruising or granule loss on composite asphalt shingles in areas within the warning area. Single-pane glazing and skylights are at risk for cracks or punctures where hail struck directly.

Damage severity along the hail path will vary with exposure, roof age, and material condition. Newer impact-resistant roofing may show surface abrasion or granule loss without full shingle failure. Older or weathered shingles are more likely to exhibit torn or missing tabs. Vehicle damage will concentrate on horizontal surfaces such as roofs, hoods, and trunk lids.

What Contractors Should Know

Safety and documentation are the first priorities. Schedule roof and exterior inspections during daylight hours and avoid climbing on wet or unstable surfaces. Photograph all damage with a dated reference and an object for scale. Record the exact address, time of inspection, and any visible hail-imprint measurements. Use the NWS warning times and the local alert sequence when preparing reports and insurance documentation.

For roofing trades, begin with a targeted triage: check ridge caps, roof penetrations, and the windward sides of structures within the warning area. Look for granule loss, bruising, and torn tabs. Temporary water mitigation should be limited to secure tarping and placement of drip-edge protection until a full repair or replacement decision is made. For vehicle and siding contractors, prioritize dents and point-impact repairs to prevent secondary water intrusion or paint corrosion.

Refer to the paid Strike Map for a precise hail track and the damage zone for this event.